Quick Answer: How Do You Clean White Marble?

How do I get my marble white again?

Mix three tablespoons (44ml) of baking soda with one quart (946ml) of water. Use a shammy to spread this mixture over your marble surface. Let the mixture sit on your marble for a few hours before wiping it away with a wet cloth.

What is the best cleaner for white marble?

There are special marble cleaning solutions out there, but regular dish soap works well. You can mix a little soap into warm water in a spray bottle or simply put a few drops onto a wet cloth. Wipe the marble surface down with this sudsy cloth and follow immediately with a rinse and a dry.

Why is my white marble turning yellow?

The most common culprit for white marble turning yellow is iron, which can be found in many natural stones. When exposed to water, acids or bleach, the iron in the stone will begin to oxidize and turn it yellow.

How do you get the yellow out of white marble?

Cure: To remove yellowing due to a wax or coating buildup the marble will need to stripped with a commercial wax stripper. I would strongly suggest having this done by a professional. These strippers often require the use of abrasive pads which can scratch and damage the marble surface.

You might be interested:  What Type Of Metamorphic Rock Is Marble?

Is baking soda safe for marble?

Baking Soda as a Homemade Marble Cleaner Baking soda is alkaline so you should only use it with caution. It is also a mild abrasive, so you need to use it gently rather than applying elbow grease. Because of these factors, a baking soda cleanser should not be used on marble every day.

How do you clean old white marble?

To clean it, use warm water, then dry it immediately with a soft cloth. If your marble has gotten extremely dirty, you can add a little dishwashing liquid to the water. Use a soft brush, rinse thoroughly—traces of soap that remain in the marble will yellow.

Is hydrogen peroxide safe for marble?

So long as the marble is light-colored, you can experiment with hydrogen peroxide. But don’t go near this method if your marble is darker—the bleach could discolor it. The very best way to care for marble is to prevent stains in the first place.

Can I use Bar Keepers Friend on marble?

Bar Keepers Friend Granite & Stone Cleaner & Polish is specially formulated for use on smooth, polished stone – including granite, marble, and quartz. Its pH-balanced formula won’t scratch or mar stone finishes, and it’s gentle enough to use every day.

Can you use magic eraser on marble?

Magic Erasers are abrasive, so avoid using them on delicate countertops such as marble and granite. Not only can you damage the sealant but the eraser may make the countertop appear dull.

Is Dawn dish soap safe for marble?

A small amount of mild dish soap, like Dawn, mixed with water is a safe way to clean marble. Just make sure you don’t use dish soap that is abrasive or contains acidic ingredients like lemon juice.

You might be interested:  Often asked: How To Make Water Marble Nail Art?

How do you clean discolored marble?

A homemade paste of baking soda and acetone can do the trick too; let this sit on the stain for about 24 hours and clean as usual. Remember to avoid cleaners with acidic ingredients. Never use abrasive sponges or cleaning tools on your marble tabletop.

What cleaning products are safe to use on marble?

Safe Marble Cleaning Solutions Marble surfaces should be cleaned with soft cotton cloths and clean rag mops along with neutral cleaners, mild liquid dishwashing detergent mixed with water, or stone cleaners. If you want to go the easy route, try a commercially available stone cleaner.

Can you clean marble with bleach?

The best way to clean a marble shower with bleach is to apply at most ½ cups of bleach (12 percent hydrogen peroxide) per 1 gallon of water. Since bleach-based cleaners have a high PH and can be very alkaline, any mixture with more parts of bleach can damage the marble, etching and dulling the surface.

Leave a Reply

Your email address will not be published. Required fields are marked *