Quick Answer: What To Use To Clean Marble Fireplace?

What cleaning products are safe to use on marble?

Safe Marble Cleaning Solutions Marble surfaces should be cleaned with soft cotton cloths and clean rag mops along with neutral cleaners, mild liquid dishwashing detergent mixed with water, or stone cleaners. If you want to go the easy route, try a commercially available stone cleaner.

How can I make my marble fireplace shine?

Buff the wet-sanded surface with a moistened felt pad or buffing wheel and a buffing powder, such as tin or aluminum oxide. Polishing. Apply a good quality marble polish with a soft cloth. Rub the polish into the surface to protect and revive its shine.

How do you clean soot off marble fireplace?

If the marble has been waxed and the surface has not been neglected for too long, the smoke or soot can usually be washed off with detergent and warm water. Use a soft scrub brush and rinse with lots of water.

How do you restore a marble fireplace?

How to Restore Marble Fireplaces

  1. Dirt – mix whiting and household bleach together to remove any stubborn dirt stains.
  2. Smoke – mix baking soda with liquid laundry bleach to tackle this problem.
  3. Rust – whiting and rust-removal jelly are all you need to remove any rust from your fireplace.
You might be interested:  FAQ: What Is A Metal Marble?

Can you use baking soda on marble?

Sprinkle a little baking soda onto the surface of the marble. Gently rub the baking soda into the marble with a soft, damp cloth. You do not want to scrub because that can damage the surface. Be sure to wipe away all traces of baking soda, so it isn’t left in contact with your marble surfaces.

Is hydrogen peroxide safe for marble?

So long as the marble is light-colored, you can experiment with hydrogen peroxide. But don’t go near this method if your marble is darker—the bleach could discolor it. The very best way to care for marble is to prevent stains in the first place.

What can I do with an old marble fireplace?

What to do if you have an unwanted fireplace that you want to get rid of?

  1. Sell it to the expert you contacted or another reclamation company. Just google “architectural salvage” and your area to see who’s near.
  2. Sell it online. There are many different sites are available for you to sell your unwanted fireplace.

What is the best thing to clean marble?

There are special marble cleaning solutions out there, but regular dish soap works well. You can mix a little soap into warm water in a spray bottle or simply put a few drops onto a wet cloth. Wipe the marble surface down with this sudsy cloth and follow immediately with a rinse and a dry.

How do you polish marble?

To polish the natural marble surface, apply baking soda, 3 tablespoons mixed with 1 quart of water using a clean cloth then wait for 5 hours to dry. For cultured marble, use a compound made specifically for polishing cultured marble or a wax made for cars.

You might be interested:  Readers ask: How To Shine Marble?

How do you remove ash stains from marble?

Mix a few drops of ammonia with 12% hydrogen peroxide to spot clean the stained area. However, be careful when using this method on darker stones as the hydrogen peroxide can lighten the color of the marble. To successfully remove stains from marble, you need to draw them out of the delicate surfaces.

How do you restore a fireplace?

To restore a cast iron fireplace, you will need to follow these steps:

  1. Clean away any rust on the surface.
  2. Strip away old layers of paint.
  3. Repair any cracks by professional welding.
  4. Re-paint or polish as desired.

Leave a Reply

Your email address will not be published. Required fields are marked *