Quick Answer: What Type Of Grout For Marble Tiles?

Do you need special grout for marble tile?

if your marble is on the floor then you’ll need sanded grout. Sanded is stronger which is why it’s used for larger grout lines. Unsanded is much weaker grout but is smoother with a brighter color.

Can I use sanded grout on marble tile?

Sanded grout is recommended for any install using ceramic, porcelain, granites, flamed or brushed marble, terrazzo, rock pebbles or meshed pebbles with a 1/8″ or up grout joint.

Should I use sanded or unsanded grout for marble?

Therefore, homeowners should use unsanded grout for any joints less than ⅛”-wide. Scratchable surfaces. Always use unsanded grout when working with a soft, smooth, polished tile like limestone or marble, since abrasive sanded grout will likely scratch its surface.

What is the easiest grout to use?

The most common variety used in projects is a cement-based grout. Dan notes that these are also the easiest to use. If you have small joints between your tile (an eighth of an inch or less), you’ll use an unsanded grout, while joints larger than an eighth of an inch call for sanded grout.

You might be interested:  Often asked: Who Buys Marble Slabs?

Will dark grout stain white marble?

Dark grout (both cement and epoxy) will bleed into white marble. great information. Would Mapei Grout Refresh Grout Colorant work to change the grout to black? ==== Comment: Yes, I believe that would work, but you should contact Mapei to get complete product use information.

What kind of grout do you use for porcelain tile?

Epoxy grout can be used on porcelain tile. By using epoxy grout you’ll be sure to use the highest quality grout in the market that will last a lifetime.

What type of grout should be used in a shower?

Epoxy grout is a great choice for showers and moist environments. Epoxy grout is water resistant and made from resins and fillers that help it work like a sealing adhesive.

Can I use sanded grout on glossy tile?

While the coarseness of sanded grout may make it a bit more challenging to clean, the sand itself shouldn’t scratch most types of ceramic or glass tiles. However, if you have tile with a high-gloss finish, you should spot -test a small amount of the dry grout on a loose tile prior to grouting and installing it.

Does marble tile need to be sealed?

When marble is polished to a high gloss, its porosity is reduced, thus making it less sensitive to water stains. Both finishes need to be sealed, but rough and textured tiles may have to be sealed more often, especially with lighter colored marble.

Can I use sanded grout on 1/16 joints?

Sanded grout is best for grout lines ranging from 1/8-inch to 1/2-inch. Because unsanded grout can also be used for 1/8-inch lines, between the two it is recommended that you use sanded grout. Unsanded grout is best for grout lines as wide as 1/8-inch and down to 1/16-inch.

You might be interested:  Quick Answer: How To Clean Stains On Marble Countertops?

Is epoxy grout good for showers?

Epoxy grout won’t crack, shrink, or discolour, making it ideal for applying in wet areas, such as showers. It’s also highly resistant to the harsh chemicals found in cleaning products. Epoxy grout is more difficult to apply than traditional grout.

What grout is best for bathroom floor?

Epoxy grout is the most durable choice for ceramic tile. As with cement-based grout, it comes in both sanded and unsanded forms. This type of grout doesn’t need to be sealed and can withstand any kind of spill your bathroom could dish up.

Leave a Reply

Your email address will not be published. Required fields are marked *